How to Remove a Decal from Your RV

Do you have a sticker on your RV that’s starting to peel and fade? The decals often have glue on the back that is not waterproof, which means it will start to peel off or fade with time. Decals can also damage paint if they are installed over top of it. It is best to remove them before they are too damaged for repair. In this article, we will show you how to remove a decal from your RV.

Why It’s Important To Remove The Decals On Your RV?

Why It's Important To Remove The Decals On Your RV

The decals on your RV should be removed since they can cause considerable damage and must be removed before they become too damaged to be repaired. Decal backings are often made of non-waterproof glue, resulting in peeling with time. In addition, if installed over paint, they can cause damage to it. The best course of action is to remove them before they become too damaged.

Is It Possible To Remove A Decal From Your RV Without Damaging The Paint Behind It?

You can remove a decal from your RV without damaging the paint behind it. It is best to go over the decal with an adhesive remover that will dissolve the glue on the back of the decal without harming the paint.

When Is The Best Time To Remove A Decal From Your RV?

The best time to remove your decal from your RV is when you first put it on, not after it has already started to peel or fade. If you wait too long, the glue will start to damage the paint underneath the decal. If you follow the steps below, you will be able to remove your decal with little damage done.

Below Is The Procedure For Removing A Decal From Your RV:

Below Is The Procedure For Removing A Decal From Your RV

The process of removing a decal from an RV begins with the use of a heat gun. This device will heat up and soften the adhesive that is holding the decal in place, making it easier to peel off. The trick is to work quickly and not let the decal cool down by putting it back onto the cooled metal surface. Using a scraper and even some paint thinner will help to loosen up the decal so that it can be removed. A razor blade is usually used once the adhesive has been loosened with the heat gun and paint thinner. Do not use too much pressure or you will cut into the surface of your RV itself.

Once all of the decal has been peeled off, you will need to go over the area with some soap and water or wax remover. This is because there may still be adhesive residue left on the metal surface of your RV. Finally, after all of the bits of adhesive have been removed, dry it thoroughly before you touch anything else to prevent any damage from occurring due to a wet surface.

Conclusion

We hope this article has helped you learn how to remove a decal from your RV. The process is not difficult, but it does require patience and care so as not to damage the paint underneath or any of the surrounding areas.